Playback/Editing
- 110 -
You can set protection for pictures you do not want to be deleted by mistake.
Select [ ]([Protect]) on the [Playback] Mode menu. (P36)
∫ Cancelling all the [Protect] settings
1 Select [Protect] on the [Playback] Mode menu.
2 Touch [ ] ([Cancel]).
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Note
•
The protect setting may not be effective on other equipment.
• Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
• Even if you do not protect pictures on a card, they cannot be deleted when the card’s
Write-Protect switch is set to [LOCK].
[Protect]
Touch [ ] ([Single]) or [ ] ([Multi]).
Select the picture.
[Single] setting
Drag the screen horizontally to select an image, and
then touch [Set].
•
Setting is cancelled by touching [Cancel].
• Exit the menu after it is set.
[Multi] setting
Touch the picture you wish to protect.
•
Setting is cancelled by touching the same picture again.
• Exit the menu after it is set.
To Next Page
Loading...
Need help?
General
