Wi-Fi
- 142 -
• Images saved on the built-in memory cannot be sent. Copy the pictures to a card (P112) before
sending.
(When [Send now over Wi-Fi] is selected) Select destination.
• Perform the steps outlined in “Change destination/detailed settings” (P143).
Note
•
[Save and Quit (use Image Uploader later)] cannot be set for memory cards smaller than
512 MB.
• [Save and Quit (use Image Uploader later)] may not be able set for images taken with other
cameras.
Select multiple images and send them
In Playback Mode, touch [ ].
• When the password input screen is displayed, enter
the password set in [Wi-Fi Password].
Touch the image you want to send (repeat).
• The page can be changed by touching [ ]/[ ].
• Touch the same image again to cancel the selection.
• Touching [ ] will cancel all selections.
Touch [Set].
• Pictures or motion pictures can also be sent by
dragging selected items upward.
Touch send method.
Send method Setting Details
[Send now over
Wi-Fi]
Send images immediately using the Wi-Fi function.
•
To transmit a motion picture recorded in [AVCHD], transmit it
using the upload tool “LUMIX Image Uploader”.
[Save and Quit (use
Image Uploader
later)]
Send images to the WEB service (Facebook/YouTube)
using the upload tool
“LUMIX Image Uploader”.
“LUMIX CLUB” can also be used to send images to WEB
services or external AV device.
•
Settings can be changed so that the upload tool “LUMIX Image
Uploader” within the camera is automatically copied to the
memory card. Upload pictures after connecting to a computer
(P154). Refer to P156 for details.
To Next Page
Loading...
Need help?
General
