Wi-Fi
- 136 -
Images can be sent to the AV device of relatives and acquaintances via “LUMIX CLUB”.
•
See the following site for AV device that is compatible with “LUMIX CLUB”.
(no compatible equipment as of August 2011.)
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Select [Manual Setup] in the [Wi-Fi Setup] menu. (P36)
Touch [ ] ([External AV device]).
Touch [Add new device].
Enter the address number and touch [Set].
• For details on how to enter characters, refer to “Entering Text” section on P72.
Enter the access number and touch [Set].
Enter any name and touch [Set].
• Close the menu after changing settings.
Information on AV device that has already been saved can be changed or deleted.
1 Select [Manual Setup] in the [Wi-Fi Setup] menu. (P36)
2 Touch [External AV device].
3 Touch the AV device you want to change or delete.
4 Touch [Edit] or [Delete].
•
Exit the menu after it is executed.
[External AV device]
Preparation:
Check the address number (16-digit number) and access number (4-digit number)
of the destination AV device issued by “LUMIX CLUB”.
(Refer to the AV equipment instruction manual for details)
Change or delete information on registered AV device.
Item Description of settings
[Edit]
Change information on AV device that has already been
registered.
Perform steps 4 through 6 in [External AV device] (P136).
[Delete]
Delete information on AV device that has already been
registered.
Confirmation screen is displayed. It is executed when [Yes] is
selected.
To Next Page
Loading...
Need help?
General
