Recording
- 90 -
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
[ ] ([On])/[ ] ([Off])
Note
•
Focus, exposure, and White Balance will be fixed to the settings for the first picture. Depending
on changes in the brightness of the subject, the recording may be brighter or darker from the
second picture.
• When the Self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3.
• The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
• Burst Mode is not cancelled when the camera is switched off.
• If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture
data.
• [Œ] is set for the flash when burst is set.
• You cannot use Burst Mode in following conditions.
– In [Panorama Assist], [Handheld Night Shot], [Hi-Speed Burst], [Flash Burst], [Starry Sky],
[Fireworks], [Pin Hole] and [Photo Frame] in Scene Mode
Applicable modes:
Using these modes, the pictures can be made sharper or softer, the colours of the pictures
can be turned into sepia colours or other colour effects can be achieved.
¢1 This can be set only when Intelligent Auto Mode is set.
¢2 This can be set only during Normal Picture Mode.
[Burst]
Burst speed (pictures/second) approx. 3.7
Number of recordable pictures max. 7 pictures
[Color Mode]
[ ] ([Standard]) This is the standard setting.
[ ] ([Happy])
¢1
Image with enhanced brightness and vividness.
[ ] ([Natural])
¢2
The picture becomes softer.
[ ] ([Vivid])
¢2
The picture becomes sharper.
[ ] ([B/W]) The picture becomes black and white.
[ ] ([Sepia]) The picture becomes sepia.
[ ] ([Cool])
¢2
The picture becomes bluish.
[ ] ([Warm])
¢2
The picture becomes reddish.
To Next Page
Loading...
Need help?
General
