- 137 -
Wi-Fi
To prevent incorrect operation or use of the Wi-Fi function by a third party and to
protect saved personal information, it is recommended that you protect the Wi-Fi
function with a password.
Setting a password will automatically display the password input screen when the Wi-Fi
function is used.
Select [Manual Setup] in the [Wi-Fi Setup] menu. (P36)
Touch [ ] ([Wi-Fi Password]).
Touch [Setup].
Enter a password and touch [Set].
• Enter any 4-digit numbers as the password.
• For details on how to enter characters, refer to “Entering Text” section on P72.
Enter the password entered in step 4 again and touch [Set].
• Close the menu after changing settings.
∫ Cancel the Wi-Fi password
1 Select [Manual Setup] in the [Wi-Fi Setup] menu. (P36)
2 Touch [Wi-Fi Password].
3 Touch [Delete].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Note
•
Make a copy of password. If you forget the password, you can reset it with [Reset Wi-Fi
Settings] in the [Wi-Fi Setup] menu, however other settings will also be reset.
• The password entered when using the Wi-Fi function will be active until the power switch is
turned [OFF]. (You will have to enter the password again after cancelling sleep mode)
[Wi-Fi Password]
To Next Page
Loading...
Need help?
General
