Recording
- 58 -
You can take pictures with connections suitable for creating panorama images.
∫ Setting the recording direction
1 Touch the direction to take picture.
2 Touch [OK].
•
The horizontal/vertical guideline will be displayed.
3 Take the picture.
•
You can retake the picture by selecting [Retake].
4 Touch [Next].
•
Part of the recorded image is displayed as a transparent image.
5 Take picture after moving the camera horizontally or
vertically so the transparent image overlaps.
•
When taking the third and later pictures, repeat steps 4 and 5.
6 Touch [Exit].
Note
•
The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
• We recommend using a tripod. When it is dark, we recommend using the self-timer for taking
pictures.
• Shutter speed may slow down up to 8 seconds.
• The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
• The recorded images can be combined into panorama pictures using the software
“PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi” on the CD-ROM (supplied).
[Panorama Assist]
To Next Page
Loading...
Need help?
General
