- 143 -
Wi-Fi
2 Touch [List].
•
Equipment that can be connected and a WEB service list will be displayed.
• When selecting [AV device], touch [Home] or [External].
3 Touch the destination name.
•
When [WEB Service] or [External] in [AV device] is selected, multiple names can be
selected. The selection will be cleared by touching the name again.
4 Touch [OK].
•
A message is displayed when the image has been sent. Touch [OK].
Change destination/detailed settings
1 Touch the picture destination icon and move it to
the front.
•
When sending images to the WEB service via a
smartphone, select [WEB Service].
• Moving the destination icon to the front will display a
description.
∫ When using the same destination
•
Previously set destinations are saved.
Touch the destination icon for the image again.
•
A message is displayed when the image has been sent.
Touch [OK].
∫ About the “LUMIX CLUB” certificate
The camera stores the route certificate required when accessing the “LUMIX CLUB”
site.
The certificate has an expiration date. If the certificate has expired, a confirmation
screen will be displayed to update the certificate when sending images to the LUMIX
CLUB. Touch [Yes] and update the certificate.
•
If the certificate has expired, images cannot be sent to the [WEB Service] or [External AV
device] until it has been updated.
To Next Page
Loading...
Need help?
General
