- 145 -
Connecting to other equipment
Turn on the TV and select the input to match the terminal in use.
Turn the camera on, and set to the Playback Mode.
Note
•
Depending on the [Aspect Ratio], black bands may be displayed on the top and bottom or the
left and right of the pictures.
• Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
• Output from the HDMI micro cable has priority when both AV cable and HDMI micro cable are
connected.
• The connection with the USB connection cable will take priority when you connect the USB
connection cable simultaneously with the HDMI micro cable.
• When you play back a picture vertically, it may be blurry.
• When pictures are displayed, they may not be displayed properly depending on the type of TV.
• You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system
when you set [Video Out] in the [Setup] menu.
• Read the operating instructions for the TV.
• Audio will be played back as monaural.
The recorded still pictures can be played back on a TV with an SD Memory Card slot.
•
Proper playback (aspect ratio) will be dependent on the TV used for viewing.
• Motion pictures recorded with [AVCHD] can be played back on Panasonic TVs (VIERA) with
the AVCHD logo mark.
• For cards compatible with playback, refer to the operating instructions of the TV.
To Next Page
Loading...
Need help?
General
