- 179 -
Others
• The wireless access points (broadband router) that can be registered are up to eight.
> Delete the unnecessary wireless access point (broadband router).
• It may take longer time to connect depending on the Wi-Fi connection setting of the
smartphone, but it is not a malfunction.
> Select [Wireless AP Info] in [Smartphone connection] from the [Wi-Fi Setup] menu. (P132)
> Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi settings of the smartphone.
• Check the information in the login screen of “LUMIX CLUB”.
http://lumixclub.panasonic.net/eng/c/
• Service user registration for the “LUMIX CLUB” is not possible in the environment without a
wireless access point (broadband router).
• The image in the built-in memory can only be transmitted one at a time.
• To transmit multiple images at once, transmit after copying the images to a card (P112).
• WEB service server or the network may be busy.
> Try again after a while.
• Is the size of the image too large?
> Transmit after making the size of the still picture smaller with [Upload Size] (P133).
> Transmit after dividing the motion picture with [Video Divide] (P104).
• It may take longer time to transmit when distance to the wireless access point (broadband
router) is far.
> Transmit closer to the wireless access point (broadband router).
The wireless access point (broadband router) cannot be registered.
It takes long time every time to connect to a smartphone.
This unit is not displayed in the Wi-Fi setting screen of the smartphone.
It takes time to setup the connection.
I have forgotten the login ID or password for the “LUMIX CLUB”.
I do not have a wireless access point (broadband router) at my home, but I would
like to perform service user registration of the “LUMIX CLUB”.
Multiple images in the built-in memory cannot be transmitted.
Images cannot be transmitted to the WEB service.
It takes time to transmit an image to the WEB service.
To Next Page
Loading...
Need help?
General
