• Singlesetting
I Press _1/1_ to select the picture
and then press _'.
v
2 Press AI,I_Ill_ to select
[SHOOTING DATE], [AGE] or
[TRAVEL DATE] and then press
[MENU/SET] to set each item.
[ OFF
TRAVEL DATE [ OFF _/'Y
MENU
@
[SHOOTING DATE]
[W/O TIME] Stamp the year, month
and date.
[WITH TIME] Stamp the year, month,
day. hour and minutes.
[AGE] (P66, 67)
If this is set to [ON], the age is stamped
on pictures recorded when the camera
was set to [WITH AGE].
[TRAVEL DATE] (P72)
If this is set to [ON], the travel date is
stamped on pictures recorded when
[TRAVEL DATE] was set to [ON].
3 Press [MENU/SET].
• If you set [DATE STAMP] for a picture
with a picture size larger than [1_], the
picture size will become smaller as
shown below.
Advanced {Playback)
4 Press A/_' to select [YES] or
[NO] and then press [MENU/SET].
(The screen shown appears when yeu
select a picture recorded with a [[_]
picture size.)
A
©
v
MENU
• The message [DELETE ORIGINAL
PICTURE?] appears if the picture was
recorded with a picture size [F3_l] or
less.
• The picture is overwritten when you
select [YES]. Pictures stamped with
date stamp cannot be restored when
they are overwritten.
• The picture stamped with date stamp is
newly created when you select [NO].
• If the original picture is protected, you
cannot overwrite it. Select [NO] and
newly create the picture stamped with
date stamp.
5 Press [MENU/SET] twice to close
the menu.
• The date stamp icon [[] ] ('A)appears
on the screen if the picture has been
stamped with the date stamp.
• Use the playback zoom (P93) to check
the stamped date information (B).
L_ I_/1_]_1_]
101
VQT 1B25
To Next Page
Loading...
