Advanced (Playback)
3 Press _1/1_ to determine the
horizontal position and press the
shutter button to set.
• Use A/y to set the frame position for
pictures rotated vertically.
• The message [DELETE ORIGINAL
PICTURE?] appears.
4 Press &IV to select [YES] or
[NO] and then press [MENU/SET].
A
©
Y
MENU
• The picture is overwritten when you
select [YES]. If you convert the aspect
ratio of a picture and then overwrite it,
you cannot restore it.
• A picture with the converted aspect ratio
is newly created when you select [NO].
• When the original picture is protected,
you cannot overwrite it. Select [NO] and
newly create a picture with the
converted aspect ratio.
5 Press [MENU/SET] twice to close
the menu.
• After converting the aspect ratio, the
picture size may become larger than that
of the original picture.
• Files that do not conform to the DCF
standard cannot be converted.
• You may not be able to convert pictures
taken on other equipment.
108
VQT1 B25
Press [_] to display the [PLAY] mode
menu and select the item to set. (P97)
You can copy recorded picture data from
the built-in memory to a card or vice versa.
] Press A/V to select the copy
destination and then press
[MENU/SET].
A
V
MENU
All the picture data in the built-in
memory are copied onto the card at
one time. _ step 3.
•E] ._t:A]:
One picture at a time is copied from the
card to the built-in memory. _ step :2.
2 Press _1/1_ to select the picture
and then press V.
(Only when selecting [L_ "_[_]])
3 Press • to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
pictures are copied from the built-in
memory to a card.)
A
MENU
• The message [COPY THIS PICTURE
TO BUILT-IN MEMORY?] appears when
you copy pictures from the card to the
built-in memory.
• If you press [MENU/SET] while copying
pictures from the built-in memory to the
card, the copying will stop halfway.
To Next Page
Loading...
