Bash
Taking Pictures
[]
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
3 Press the shutter button halfway
to focus.
O: Shutter button
• The status indicator _ lights for about
1 second when you turn this unit on _.
(When using the LCD monitor.)
• The status indicator continues to light if
you turn the camera on when using the
viewfinder.
1 Hold this unit gently with both
hands, keep your arms still at
your side and stand with your feet
slightly apart.
• The focus indication _2_lights green and
the AF area _1_turns white to green.
(3: Aperture value
(©: Shutter speed
• The subject is not focused in the
following cases.
-The focus indication blinks (green).
-The AF area turns white to red or
there is no AF area.
-The focus sound beeps 4 times.
• If the distance is beyond the focus
range, the picture may not be properly
focused even if the focus indication
lights.
4 Press the shutter button fully to
take a picture.
(A):AF assist lamp
_9):When holding the camera vertically
2 Aim the AF area at the point you
want to focus on.
• When you press the shutter button, the
screen may become bright or dark for a
moment. This function allows easy
adjustment of focus and the recorded
picture will not be affected.
• Be careful not to move the camera when
you press the shutter button.
• Do not cover the microphone or the AF
assist lamp with your fingers or other
objects.
• Do not touch the front of the lens.
• When taking pictures, make sure your
footing is stable and there is no danger of
colliding with another person, a ball etc.
27
VQT 1B25
To Next Page
Loading...
