Charging the Battery
with the Charger
The battery is not charged when the
camera is shipped. Charge the battery
before use.
1 Insert the battery terminals and
attach the battery to the charger.
2 Connect the charger to the
electrical outlet.
Preparation
• After charging is completed, be sure to
disconnect the charger from the electrical
outlet.
• The battery becomes warm after using it
and during and after charging. The
camera also becomes warm during use.
This is not a malfunction.
• The battery will be exhausted if left for a
long period of time after being charged.
Recharge the battery when it is
exhausted.
• The battery can be charged even if it is
not fully discharged.
• Use the dedicated charger and battery.
• Charge the battery with the charger
indoors.
• Do not disassemble or modify the
charger.
• Charging starts when the [CHARG E]
indicator _'_lights green.
• Charging is complete when the
[CHARGE] indicator _'_,_turns off (after
about 120 minutes).
olf the [CHARGE] indicator blinks, refer
to P16.
3 Detach the battery after charging
is complete.
15
VQT 1B25
To Next Page
Loading...
