Advanced (Recording pictures)
Aperture-priority AE Shutter-priority AE
Set the aperture value to a higher number
when you want a sharp focus background.
Set the aperture value to a lower number
when you want a soft focus background.
| Tilt the joystick towards A/, to
set the aperture value.
[]
When you want to take a sharp picture of a
fast moving subject, set with a faster
shutter speed. When you want to create a
trail effect, set to a slower shutter speed.
| Tilt the joystick towards A/, to
set the shutter speed.
2 Take a picture. 2 Take a picture.
• Refer to P58 for the available aperture
values and the shutter speed.
• Set the aperture value to a higher number
when the subject is too bright. Set the
aperture value to a lower number when
the subject is tee dim.
• The brightness of the screen and the
recorded pictures may differ. Check the
pictures using the review function or
playback mode.
• The aperture value and the shutter speed
displayed on the screen turn red when the
exposure is not adequate.
• Refer to P58 for the available aperture
values and the shutter speed.
• The brightness of the screen may differ
from the brightness of the actual pictures.
Check the pictures using the review
function or playback mode.
• You cannot set the following items in
Shutter-priority AE.
- Slow sync./Red-eye reduction [_]
(P43)
• The aperture value and the shutter speed
displayed en the screen turn red when the
exposure is net adequate.
• We recommend using a tripod when the
shutter speed is slow.
56
VQT1 B25
To Next Page
Loading...
