Press [_ ] to display the [REC] mode
menu and select the item to set. (P76)
This function allows you to reproduce a
white color close to real life in pictures
recorded under sunlight, halogen lighting
etc. in which the white color may appear
reddish or bluish. Select a setting that
matches the recording conditions.
[AWB]
(Auto white for auto setting
balance)
for recording outdoors
(Daylight) on a bright day
_L, for recording outdoors
(Cloudy) on a cloudy day
_. for recording outdoors
(Shade) in the shade on a
bright day
for recording with the
flash only
for recording under
halogen lighting
[]
(Flash)
(Halogen)
(White set 1)
(White set 2)
_SET
(White set)
for using the preset
white balance
for setting the white
balance again
• Auto white balance
The available white balance range is shown
in the following illustration. When you take
a picture beyond the available white
balance range, the picture may appear
reddish or bluish. Even within the confines
of the range, the auto white balance may
not operate properly if there are many light
sources or there is no color close to white.
In these cases, set the white balance to a
mode other than [AWB].
Advanced (Recording pictures)
1 Auto white balance will work within this
range.
2 Blue sky
3 Cloudy sky (Rain)
4 Shade
5 TV screen
6 Sunlight
7 White fluorescent light
8 Incandescent light bulb
9 Sunrise and sunset
10 Candlelight
0000 K _ 2)
9000 K
8000 _ _ 3)
7°°°}< _5)[]
6000 K _ 6)
1) _oo0 _1
4000 K
2000 _<_ 9)
lOOOK _10)_
K Kelvin Color Temperature
• Setting the white balance manually
( _SET)
Use this to set the white balance manually.
1 Select [_._mSET](White set) and then
press [MENU/SET].
2 Select [_U,a WHITE SET 1] or
[_._ WHITE SET 2] and then press
[MENU/SET].
A
@
WHFTESET 2 MENU_
@
• You can also use the joystick to select
or set.
77
VQT 1B25
To Next Page
Loading...
