Advanced (Recording pictures)
Recording which clay
of the vacation you
take the picture
If you set the departure date of the vacation
in advance, the number of days that have
passed since the departure date (which
day of the vacation it is) is recorded when
you take the picture. You can display the
the number of days that have passed when
playing back the pictures and stamp it on
the recorded pictures with [DATE STAMP]
(P100).
• Setting the departure/return date
(The following screens are shown when
program AE mode [ p ] is selected.)
1 Press [MENU/SET] and then
press "4.
2 Press • to select the [SETUP]
menu icon [_] and then press I_.
3 Press A/• to select
[TRAVEL DATE] and then press
4 Press • to select [SET] and then
press [MENU/SET].
©
Y
MENU
(A):The number of days that have passed
since the departure date
• The number of days that have passed
since the departure date can be printed
on each picture by using the software
[LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied). (For information
about printing, refer to the separate
operating instructions for PC connection.)
5 Press AI•I_IP_ to set the
departure date and then press
[MENU/SET].
_1/1_: Select the desired item.
A/Y: Set the year, month and date.
72
VQT1 B25
To Next Page
Loading...
