6 Press AI_'I4111_ to set the return
date and then press [MENU/SET].
v
MENU
®
_I/,: Select the desired item.
A/_': Set the year, month and date.
• The travel date is canceled ifthe current
date is after the return date.
• Ifyou do not want to set the return date,
press [MENU/SET] while the date bar is
displayed.
• You cannot set a date that is before the
departure date.
7 Press [MENU/SET] to close the
menu.
8 Take a picture.
(&):The number of days that have passed
since the departure date
• The number of days that have passed
since the departure date is displayed for
about 5 seconds if this unit is turned on
etc. after setting the travel date or when
the travel date is set.
• When the travel date is set, [_'J]
appears on the lower right of the
screen. (It is not displayed if the current
date is after the return date.)
Advanced (Recording pictures)
• Canceling the travel date
The travel date is automatically canceled if
the current date is after the return date. If
you want to cancel the travel date before
the end of the vacation, select [OFF] on the
screen shown in step 4. and then press
[MENU/SET] twice.
• The travel date is calculated using the
date in the clock setting (P19) and the
departure date you set. If you set
[WORLD TIME] (P74) to the travel
destination, the travel date is calculated
using the date in the clock setting and the
travel destination setting.
• The travel date setting is memorized even
if the camera is turned off.
• Ifyou set a departure date and then take a
picture on a date before this departure
date, [-] (minus) is displayed in orange
and the day of the vacation that you took
the picture is not recorded.
• Ifyou set a departure date and then
change the clock setting to the date and
time at the travel destination, [-] (minus) is
displayed in white and the day of the
vacation that you took the picture is
recorded when the travel destination date
is, for example, one day before the
departure date.
• If [TRAVEL DATE] is set to [OFF], the
number of days that have passed since
the departure date will not be recorded
even if you set the travel date or the return
date. Even if [TRAVEL DATE] is set to
[SET] after taking the pictures, which day
of the vacation you took them is not
displayed.
*Set the clock if the message [PLEASE
SET THE CLOCK] appears. (P19)
• The [TRAVEL DATE] setting also affects
simple mode [qp].
73
VQT 1B25
To Next Page
Loading...
