EasyManua.ls Logo

Panasonic Lumix DMC-FZ8

Panasonic Lumix DMC-FZ8
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparation
Closing the menu screen
Press [MENU/SET].
When the mode dial is set to
[[]], you can also close the menu
screen by pressing the shutter
button halfway or press the center of
the joystick to finish.
Switching to the [SETUP] menu
About the Setup Menu
Set items as required. (Refer to P22 to 25
for each menu item.)
Select [RESET] to return the settings to
the initial settings at the time of purchase.
(P24)
[CLOCK SET], [AUTO REVIEW] and
[POWER SAVE] are important items.
Check their settings before using them.
| Press _1 on a menu screen. Q [CLOCK SET] (P19)
or
(Changing the date and time.)
Press [_] to display the [SETUP] menu
and select the item to set. (P21)
Change date and time.
[_ [AUTO REVIEW]
(Displaying the recorded picture.)
..................................................................................................................................................................................................................2Press to select the [SETUP] Press [ME.0]___to display the [SETUP] menu
and select the item to set. (P21)
menu icon. Set the length of time that the picture is
displayed after taking it.
[1SEC.], [3SEC.], [ZOOM], [OFF]
The auto review function is not activated
V
or in motion picture mode [_].
When pictures are recorded in auto bracket
(P49) or burst mode (P51), the auto review
......................................................................................................................................................................................................................................................................function is activated regardless of the
3 Press I_. setting on the auto review function, (The
or
*Select a menu item next and set it.
picture is not enlarged.)
The auto review function is activated while
pictures with audio (P82) are being
recorded regardless of its setting. (The
picture is not enlarged.)
When the quality is set to [RAW], the auto
review function works until the end of
recording onto the card. (The picture is
not enlarged.)
The auto review setting is disabled when
using auto bracket or burst mode, in motion
picture mode [[_], when [AUDIO REC.] is
set to [ON] or when the quality is set to
[RAW].
In simple mode [_], the auto review
function is fixed to [lSEC.].
22
VQT1 B25

Table of Contents

Related product manuals