Basic
• Focus range in simple mode• [SENSITIVITY] (P79):
This setting becomes the same as when
the highest ISO sensitivity is set to
[ISO800] in intelligent ISO sensitivity
mode [(_]. (P62)
• [ASPECT RATIO]/[PICT.SIZE]/[QUALITY]
(PSO):
- [_ ENLARGE]:
: [_ (7M)/_
- [_4"X 6"/10 X 16cm]:
: _ (2.6M EZ)/_
- [(_ E-MAIL]:
: [6_(0.3M EZ)/_[_
• [AF MODE] (P83):
• [AF ASSIST LAMP] (P85):
[ON]
• [METERING MODE] (P82):
• You cannot use the following functions.
-High angle mode
-White balance fine adjustment
- Exposure compensation
- Flash output adjustment
- Auto bracket
-[AUDIO REC.]
- [D.ZOOM]
- [COLEFFECT]
- [PICT.ADJ.]
- [CONT.AF]
- [PLAY ON LCD]
- Out-of4rame display
-[GUIDE LINE]
• You cannot set the following items.
-[ZOOM RESUME]
- [TRAVEL DATE]
- [WORLD TIME]
-[CONVERSION]
i 5 cm (0.17 feet)
1X_ .
1
_[]_ 1 m (3.3 feet)
m_')]12 x I i
l
• The zoom magnification values will
change when using the extended optical
zoom.
• Refer to P54 for the tele-macro.
• The Backlight Compensation
Backlight refers to when light comes from
behind a subject.
In this case, the subject, such as a person,
will become dark so this function
compensates the backlight by brightening
the whole of the picture.
Press A.
• When the backlight compensation
function is activated, [Q]
(compensating backlight ON indication
_A))appears. Press • again to cancel
this function.
• We recommend using the flash when you
use the backlight compensation function.
(The flash is fixed to Forced ON [O].)
• The flash setting is fixed to AUTO/
Red-eye reduction [_] when the
backlight compensation function is set to
[OFF].
31
VQT 1B25
To Next Page
Loading...
