• Jitter is avoided when taking pictures
indoors of a moving subject by increasing
the ISO sensitivity and making the shutter
speed faster.
1/125 ISO800
• Noise is avoided when taking pictures
indoors of a subject with no movement by
decreasing the ISO sensitivity.
1/30 ISO200
• When you press the shutter button
halfway, [i-i-_] (_) appears. When you
press the shutter button fully, the shutter
Advanced (Recording pictures)
• When the flash is activated, the ISO
sensitivity is automatically increased to a
maximum of [ISO400].
• Depending on the brightness and how fast
the subject is moving, jitter may not be
avoided.
• The camera may not be able to detect the
movement of the subject in the following
cases.
-When the moving subject is small
-When the moving subject is at the edge
of the screen
-When the subject starts moving the
instant the shutter button is pressed fully
• To avoid picture noise, we recommend
decreasing the highest ISO sensitivity or
setting [NOISE REDUCTION] in
[PICT.ADJ.] to [HIGH] or setting the items
except [NOISE REDUCTION] to [LOW] to
take pictures. (P86)
• The digital zoom cannot be used.
speed and the ISO sensitivity appear for a
while.
53
VQT 1B25
To Next Page
Loading...
