Advanced (Recording pictures)
7 Press • to select
[CREATE MOTION PICTURE],
press I_ and then create a flip
animation.
FRAME RATE 5fps
©,
• The file number appears after creating
a flip animation.
• Press [MENU/SET] three times to close
the menu after creating the flip
animation.
• Deleting all still images used to create
flip animation
When selecting [DELETE STILL
PICTURES] in [FLIP ANIM.] menu, a
confirmation screen appears. Select [YES]
with • and then press [MENU/SET].
• You cannot use the direction detection
function, burst mode, auto bracket and
[AUDIO REC.].
• The images in each frame do not appear
in normal review. (P35)
• If you execute [CREATE MOTION
PICTURE], flip animation is made from all
pictures recorded for flip animation.
Delete unnecessary pictures.
• Audio cannot be recorded.
• You cannot record audio using the audio
dubbing. (P105)
• Playback may not be possible on other
equipment. You may also hear noise
during playback on other equipment which
does not have a mute function.
Press [_] to display the [REC] mode
menu and select the item to set. (P76)
The tele conversion lens (DMW-LT55;
optional) allows you to record even more
close-up pictures (1.7× more). The wide
conversion lens (DMW-LW55; optional)
allows you to record even wider angle
pictures (0.7x wider). The close-up lens
(DMW-LC55; optional) allows you to take
close-up pictures of a small subject.
• The lens adaptor (DMW-LA2; optional) is
necessary to attach a conversion lens or
close-up lens.
1 Remove the lens cap, lens hood
and hood adaptor.
2 Attach the lens adaptor
(DMW-LA2; optional).
• Conversion lens cannot be used
together with the ND filter
(DMW-LND52) and the MC protector
(DMW-LMC52).
Always detach the ND filter or MC
protector before attaching the
conversion lens.
• Rotate the lens slowly and carefully.
88
VQT1 B25
To Next Page
Loading...
