Advanced (Playback)
1 Press &/• to select [ALL] or [_]
and then press [MENU/SET].
A
©
Y
MENU
[ALL] Displays all pictures.
[_] Displays only those pictures
that have been set as
favorites (P99).
• If none of the pictures have [-_]
displayed, you cannot select [Y_] even
if [FAVORITE] is set to [ON].
2 Press • to select [START] and
then press [MENU/SET].
(Screen when [ALL] is selected)
,,L
MENU
® ® ©
• The cursor displayed during a slide
show ® or while a slide show is paused
® or during [MANUAL] slide show _'0)is
the same as A/Y/_I/I_.
• Press • to pause the slide show. Press
• again to cancel pause.
• Press _1/1_ while paused to display the
previous or next picture. (However, the
selected effect is disabled.)
3 Press • to finish.
• Setting the audio, duration and effect
Select [DURATION], [EFFECT] or [AUDIO]
on the screen shown in step 2 and set.
[DURATION] Can be set to [1SEC.],
[2SEC.], [3SEC.],
[SSEC.] or [MANUAL]
(manual playback).
• The playback durations
are approximations
only. They differ
depending on the
pictures which are
played back.
[EFFECT] A slide show effect can
be selected.
[OFF]:No effect
: New pictures slide
across the screen.
_: Current pictures
fade out and new
pictures fade in.
[_: New pictures
gradually fill the
screen from the
center.
: An effect is
selected at
random,
• If you set [DURATION]
to [MANUAL] the
settings in [EFFECT]
are disabled.
[AUDIO] If set to [ON], the audio
of the pictures with audio
is played back.
• You can onh select [MANUAL] when
['k] was selected in step 1.
• Press _1/1_ to display the previous or
next picture when [MANUAL] is selected.
• If you set [AUDIO] to [ON] and then play
back a picture with audio, the next picture
will be displayed after the audio has
finished.
• You cannot play back motion pictures and
use power save in a slide show. (However,
the setting for power save mode is fixed to
[10MIN.] while pausing a slide show or
playing back a manual slide show.)
98
VQT1 B25
To Next Page
Loading...
