26
Basic
VQT4M51 (ENG)
Taking a Still picture
• Set the drive mode dial to [ ] (single).
1
Select the Recording Mode. (P34)
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
• Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not
achieved, except when set to flash.)
• When the image is correctly focused, the picture
will be taken, since the [Focus/Release Priority]
is set initially to [FOCUS].
3
Press the shutter button fully (push it in
further), and take the picture.
60
602.8
2.8
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 26 ページ ２０１２年１０月２５日 木曜日 午後５時２５分
To Next Page
Loading...
