37
Recording
(ENG) VQT4M51
Determine the exposure by manually setting the aperture value and the shutter speed.
The Manual Exposure Assistance appears on the lower portion of the screen to indicate
the exposure.
1
Set the mode dial to [ ].
2
Rotate the rear dial to set the shutter speed, and
rotate the front dial to set the aperture value.
A Exposure meter
B Aperture value
C Shutter speed
D Manual Exposure Assistance
∫ Manual Exposure Assistance
∫ About [B] (Bulb)
If you set the shutter speed to [B], the shutter stays open while the shutter button is
pressed fully (up to approximately 60 minutes).
The shutter closes if you release the shutter button.
Use this when you want to keep the shutter open for a long time to take pictures of
fireworks, a night scene etc.
•
When you take pictures with the shutter speed set to [B], noise may become visible. To avoid
picture noise, we recommend setting [Long Shtr NR] in the [Rec] menu to [ON] before taking
pictures.
• The Manual Exposure Assistance does not appear.
• This cannot be used when [Electronic Shutter] is set to [ON].
• It can only be used with Manual Exposure Mode.
∫ Constant preview
In Manual Exposure Mode, when [Constant Preview] in the [Custom] menu is [ON], you
will be able to confirm the effects of aperture and shutter speed on the screen. (P38)
•
Close the flash.
• It can only be used with Manual Exposure Mode.
Manual Exposure Mode
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
SSSS
F
1258
5.64.02.8 8.0 11
603015
305.6
00
-
3
-
3
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 37 ページ ２０１２年１０月２５日 木曜日 午後５時２５分
To Next Page
Loading...
Need help?
General
