71
Wi-Fi
(ENG) VQT4M51
[Send Images Stored in the Camera]
• When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
• Details of the playback menu [Favorite] or [Print Set] settings will not be sent.
• Some images taken with a different camera may not be able to be sent.
• Images that have been modified or edited with a computer may not be able to be sent.
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3 Press 3/4 to select [Send Images Stored in the Camera], and then press
[MENU/SET].
4
Press
3
/
4
to select [Smartphone], and then press [MENU/SET].
5 Select the connection method.
6 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
7
Press
3
/
4
to select [Single Select] or [Multi Select] and then press [MENU/SET].
• To change the setting or disconnect, press [Wi-Fi].
8 Select and send the images.
When sending images to smartphone/tablet
Preparations:
•
Install the “LUMIX LINK” in advance. (P60)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 71 ページ ２０１２年１０月２５日 木曜日 午後５時２５分
To Next Page
Loading...
Need help?
General
