60
Wi-Fi
VQT4M51 (ENG)
[Remote Shooting]
You can remotely operate the camera using a smartphone/tablet.
You need to install “LUMIX LINK” on your smartphone/tablet.
The “LUMIX LINK” is an application provided by Panasonic that allows your smartphone/
tablet to perform the following operations of a Wi-Fi-compatible LUMIX.
•
The service may not be able to be used properly depending on the type of smartphone/tablet
being used. For compatible devices, see the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
• When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
¢ To connect to this unit with [Wi-Fi Direct], Android OS 4.0 or above is required.
1 Press [Wi-Fi].
Installing the smartphone/tablet app “LUMIX LINK”
For Android
TM
apps For iOS apps
Version 2.1 (As of October 2012)
OS Android 2.2~Android 4.0
¢
iOS 4.3~iOS 6.0
Installation
procedure
1 Connect your Android device
to a network.
2 Select “Google Play
TM
Store”.
3 Enter “LUMIX LINK” into the
search box.
4 Select “LUMIX LINK” and
install it.
•
The icon will be added to the
menu.
1 Connect the iOS device to the
network.
2 Select “App Store
SM
”.
3 Enter “LUMIX LINK” into the
search box.
4 Select “LUMIX LINK” and
install it.
•
The icon will be added to the
menu.
Connecting to a smartphone/tablet
Preparations:
•
Install the “LUMIX LINK” in advance. (P60)
[Wi-Fi]/[Fn1] button can be used in two ways, as
[Wi-Fi] or as [Fn1] (function 1). At the time of
purchase, it is initially set to [Wi-Fi].
•
Refer to P25 for details about the function button.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 60 ページ ２０１２年１０月２５日 木曜日 午後５時２５分
To Next Page
Loading...
