67
Wi-Fi
(ENG) VQT4M51
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you take it.
Since the camera gives priority to recording, sending may take longer during the recording
of Burst pictures or motion pictures.
•
Motion pictures cannot be sent.
• If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will
not be resent.
• You may not be able to delete files or use the playback menu while sending.
• When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3 Press 3/4 to select [Send Images While Recording], and then press [MENU/
SET].
4 Press 3/4 to select [Smartphone], and then press [MENU/SET].
5 Select the connection method.
6 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
7 Take pictures.
•
The pictures are sent automatically after taking them.
• To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to smartphone/tablet
Preparations:
•
Install the “LUMIX LINK” in advance. (P60)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 67 ページ 2012年10月25日 木曜日 午後5時25分