61
Wi-Fi
(ENG) VQT4M51
2 Press 3/4 to select [New Connection], and then press
[MENU/SET].
•
When connecting with the setting you used before, you can
select the connection destination from [Select a destination from
History] (P62) or [Select a destination from Favorite] (P62).
3 Press 3/4 to select [Remote Shooting], and then press
[MENU/SET].
•
The information (SSID and password) required for directly
connecting your smartphone/tablet to this unit is displayed.
Select [ ] on the smartphone/tablet.
•
Motion pictures are recorded by timer recording. Set
the recording time in advance.
•
You cannot stop motion picture recording halfway from a
smartphone/tablet. To stop the recording, operate the camera.
•
A motion picture is not displayed on the screen of the
smartphone/tablet during while its recording is taking place.
• The recorded images are saved in the camera.
• Some settings are not available.
• The screen differs depending on the operating system.
On your smartphone/tablet
(The default connection method is set to [Manual Connection].)
4 On the setting menu of your smartphone/tablet, turn on the Wi-Fi function.
5 Select the SSID that matches the one displayed on the sceen of this unit, and
then enter the password.
6 Start “LUMIX LINK” on your smartphone/tablet. (P60)
•
When the connection is complete, live images being captured by the camera are
displayed on the smartphone/tablet.
Taking pictures via a smartphone/tablet (remote recording)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 61 ページ ２０１２年１０月２５日 木曜日 午後５時２５分
To Next Page
Loading...
Need help?
General
