68
Wi-Fi
VQT4M51 (ENG)
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3
Press
3
/
4
to select [Send Images While Recording], and then press [MENU/SET].
4 Press 3/4 to select [PC], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET].
6
Press
3
/
4
to select the PC you want to connect to, and then press [MENU/SET].
7 Press 3/4 to select the folder you want to send, and then press [MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
8 Take pictures.
•
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to PC
Preparations:
•
Turn the computer on.
• Prepare folders for receiving images on the PC before sending a picture to the PC.
[Via Network]
When you want to connect to your PC via a wireless access point. (P63)
[Direct]
When you want to directly connect your PC to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection]. (P65)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 68 ページ ２０１２年１０月２５日 木曜日 午後５時２５分
To Next Page
Loading...
Need help?
General
