75
Wi-Fi
(ENG) VQT4M51
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3 Press 3/4 to select [Send Images Stored in the Camera], and then press
[MENU/SET].
4 Press 3/4 to select [Printer], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET].
6 Press 3/4 to select a printer you want to connect, and then press [MENU/SET].
7 Select pictures, and then print. (P80)
•
To change the setting or disconnect, press [Wi-Fi].
When sending images to Printer
Preparations:
•
You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-compatible)
¢
printer.
¢ Compliant with the DPS over IP standards.
See the following website for information on the PictBridge (wireless LAN-compatible) printer.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
[Via Network]
When you want to connect to your Printer via a wireless access
point. (P63)
[Direct]
When you want to directly connect your printer to this unit with
[Wi-Fi Direct], [WPS Connection], or [Manual Connection]. (P65)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 75 ページ ２０１２年１０月２５日 木曜日 午後５時２５分
To Next Page
Loading...
