Recording pictures (basic)
40
VQT0S19
Taking Pictures using the Built-in Flash
When you set the flash, you can take
pictures using the built-in flash according to
the recording condition.
n To open the flash
Slide the [< OPEN] switch
A.
B Photo flash
• Do not cover the photo flash with your
fingers or any other items.
n To close the flash
Press the flash until it clicks.
• Be sure to close the flash when not in use.
• The flash setting is fixed to Forced OFF
[v ] while the flash closes.
n Switching to the appropriate flash
setting
Set the flash setting of the built-in flash
according to the scene to be recorded.
For the selectable flash settings, refer to
“Available flash settings by recording
mode” on P42.
SCN
1
SCN
2
B
A
To Next Page
Loading...
