EasyManua.ls Logo

Panasonic Lumix DMC-LX1 - Night Portrait Mode; Night Scenery Mode

Panasonic Lumix DMC-LX1
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Recording pictures (advanced)
64
VQT0S19
This mode allows you to take pictures
against a night landscape. The subject can
be recorded with brightness in real life by
using the flash and the slow shutter speed.
n Technique for Night portrait mode
• Open the flash. (P40)
• Due to the slow shutter speed, use a
tripod and the self-timer (P44) for best
results.
• Keep the subject still for about 1 second
after taking a picture.
• We recommend taking pictures by rotating
the zoom lever to Wide (1×), and being at
a distance about 4.92 feet (1.5 m) from
the subject.
• The focus range is 3.94 feet (1.2 m) to
16.4 feet (5 m). (See page 42 for details
about the flash control range.)
• The shutter may be kept closed (max.
about 1 sec.) after taking a picture with
slow shutter speed, but this is not a
malfunction.
• When you take pictures in dark places,
noises may become visible.
• The flash is set to Slow sync./Red-eye
reduction [u] and always functions in
this mode.
• The ISO sensitivity is automatically
adjusted to the optimal value.
• You cannot use [CONT.AF] while in this
mode.
• [PLEASE OPEN THE FLASH] appears
when the flash is closed.
This mode allows you to take a picture of a
nightscape. The landscape can be
recorded vividly by using the slow shutter
speed.
n Technique for Night scenery mode
• Use a tripod as the shutter may be open
for as long as 8 seconds. Use the self-
timer for best results. (P44)
• The focus range is 16.4 feet (5 m) to Z.
• The shutter may be kept closed (max.
about 8 seconds) after taking a picture
with slow shutter speed, but it is not a
malfunction.
• When you take pictures in dark places,
noise may become visible.
• The Flash setting is fixed to Forced OFF
[v ].
• The ISO sensitivity is fixed to [ISO80].
• The settings on the AF assist lamp is
disabled.
• You cannot use [CONT.AF] while in this
mode.
Night portrait mode
X
19
Night scenery mode
W
19

Table of Contents

Related product manuals