No.SX-DSV01676 Specifications by model - 2 -
R2 Motor Company, Matsushita Electric Industrial Co., Ltd.
Model No. MBDDT2110N MBDDT2210N
Power input
Single phase,
100V
Single phase,
100V
Max. current rating of power device 15A 15A
Current rating of current detector 10A 10A
10000 resolution 10000 resolution
Feedback signal of rotary
encoder
131072 resolution 131072 resolution
Regenerative resistor External External
Absolute system
Enabled (*1) Enabled (*1)
Cooling fan None None
Ambient temperature
0 to 55
degrees 0 to 55degrees
Main power cable HVSF 0.75 to 2.0mm
2
HVSF 0.75 to 2.0mm
2
AWG14 to 18 AWG14 to 18
Earth cable HVSF 2.0 mm
2
HVSF 2.0 mm
2
AWG14 AWG14
M ot o r c abl e HVSF 0.75 to 2.0mm
2
HVSF 0.75 to 2.0mm
2
AWG14 to 18 AWG14 to 18
Inrush current (Main power) (*2)
Max．7A Max．14A
Inrush current (Control power) (*2)
Max．14A Max．28A
Mass Approx. 1.1 kg Approx. 1.1 kg
Frame size B-frame B -frame
(*1) Enabled when encoder is 17-bit and is used as an absolute.
Back up battery for absolute encoder is externally attached.
(*2) Current is a result of based on the conditions of power supply input column calculation.
To Next Page
Loading...
