No.SX-DSV01676 Specifications by model - 3 -
R2 Motor Company, Matsushita Electric Industrial Co., Ltd.
Model No. MCDDT3120N MCDDT3520N
Power input
Single phase,
100V
Single/3-phase,
200V
Max. current rating of power device 30A 30A
Current rating of current detector 20A 20A
10000 resolution 10000 resolution
Feedback signal of rotary
encoder
131072 resolution 131072 resolution
Regenerative resistor Built-in Built-in
Absolute system
Enabled (*1) Enabled (*1)
Cooling fan Built-in Built-in
Ambient temperature 0 to 55degrees 0 to 55degrees
Main power cable HVSF 0.75 to 2.0mm
2
HVSF 0.75 to 2.0mm
2
AWG14 to 18 AWG14 to 18
Earth cable HVSF 2.0 mm
2
HVSF 2.0 mm
2
AWG14 AWG14
M ot o r c abl e HVSF 0.75 to 2.0mm
2
HVSF 0.75 to 2.0mm
2
AWG14 to 18 AWG14 to 18
Inrush current (Main power) (*2)
Max．30A Max．60A
Inrush current (Control power) (*2)
Max．14A Max．28A
Mass Approx. 1.5 kg Approx. 1.5 kg
Frame size C-frame C -frame
(*1) Enabled when encoder is 17-bit and is used as an absolute.
Back up battery for absolute encoder is externally attached.
(*2) Current is a result of based on the conditions of power supply input column calculation.
To Next Page
Loading...
