No.SX-DSV01676 Specifications by model - 6 -
R2 Motor Company, Matsushita Electric Industrial Co., Ltd.
Model No. MFDDTA390N MFDDTB3A2N
Power input 3-phase,200V 3-phase,200V
Max. current rating of power device 100A 150A
Current rating of current detector 90A 120A
10000 resolution 10000 resolution
Feedback signal of rotary
encoder
131072 resolution 131072 resolution
Regenerative resistor Built-in Built-in
Absolute system
Enabled (*1) Enabled (*1)
Cooling fan Built-in Built-in
Ambient temperature 0 to 55degrees 0 to 55degrees
Main power cable HVSF 3.5mm
2
(* 2) HVSF 3.5mm
2
AWG11 AWG11
Earth cable HVSF 3.5mm
2
HVSF 3.5mm
2
AWG11 AWG11
Motor cable HVSF 3.5mm
2
(
＊3 ) HVSF 3.5mm
2
AWG11 AWG11
Inrush current (Main power) (*2)
Max
．22A Max．22A
Inrush current (Control power) (*2)
Max．14A Max．14A
Mass Approx. 6.0 kg Approx. 6.0 kg
Frame size F-frame F-frame
(*1) Enabled when encoder is 17-bit and is used as an absolute.
Back up battery for absolute encoder is externally attached.
(*2) Current is a result of based on the conditions of power supply input column calculation.
(*3) Varies depending on the motor to be used. Use the cable with cable diameter
as the table below shows, or larger.
Applicable motor
Main power
cable
Motor cable
HVSF 5.3mm
2
HVSF 5.3mm
2
MFMA452***,MGMA452***
MHMA502***,MSMA502***
MDMA502*** AWG10 AWG10
To Next Page
Loading...
