Panasonic NE-1840 - Cycle Counter; Beep Tone

- 16 -
How to Operate NE-3240/NE-2140/NE-1840
B. CYCLE COUNTER
X To Read Total Cumulative Times That The Oven Has Been Used
PAD INSTRUCTION DIGITAL DISPLAY WINDOW
1
Open the door. The oven lamp will be turned on.
 “0” will appear in the display.
2
Close the door.
Note: Carry out Step 3 within 60 seconds of closing the door, or the
display will go blank.
3
BUZZ
+
PROG
While pressing Buzzer Switch, press Program Entry Switch.
Example: 99999 times
C. BEEP TONE
X To Cancel Beep
PAD INSTRUCTION DIGITAL DISPLAY WINDOW
1
PROG
Press Program Entry Switch.
(The door may be open or closed at this stage.)
PROG
2
BUZZ
Press Buzzer Switch.
 “bEEP” and first stage heating indicator “1” will appear in Digital
Display Window.
PROG
3
BUZZ
Press Buzzer Switch again.
 “0 bEEP” will appear in Digital Display Window.
PROG
4
PROG
Press Program Entry Switch again.
 “PROG” will stop blinking. You have completed setting silent level.
PROG