Recording Mode
-24-
1
Press the [TELE MACRO] Button (8).
≥The zoom magnification is fixed at 10k and
the subject can be focused on as close as
20 cm .
≥The [ ] Indication appears.
2 Press the Recording Start/Stop Button (45)
or the [PHOTO SHOT] Button
(39).
To Cancel the Tele-Macro Function
Press the [TELE MACRO] Button.
ª To Use the Zoom Microphone
Function
Along with the zooming operation, the
microphone’s directional angle and sensitivity are
varied for recording sounds.
≥Set [TAPE RECORDING MENU] >>
[RECORDING] >> [ZOOM MIC] >> [ON]. (The
[Z.MIC] Indication is displayed.)
≥For other notes concerning this item, see
-50-.
Digital Zoom Function
This function is useful when you want to record
close-up shots of subjects located beyond a
normal zoom range of 1k to 10k magnification.
With the Digital Zoom Function, you can select a
magnification from 20k up to 500k.
1 Set [TAPE RECORDING MENU] >>
[CAMERA] >> [D.ZOOM] >> [20k] or [500k].
TELE
MACRO
(8)
T.MACRO
T.MACRO
PHOTO SHOT
(39)
(45)
Z.MIC
MENU
STILL
ENTER
FADE
is
(18)
≥20k: Digital zooming to 20k
≥500k: Digital zooming to 500k
2 Push the [W/T] Lever (40) towards [W] or
towards [T] to zoom in or out.
To Cancel the Digital Zoom Function
Set [TAPE RECORDING MENU] >> [CAMERA]
>> [D.ZOOM] >> [OFF].
≥For other notes concerning this item, see
-50-.
Image Stabilizer Function
If the Movie Camera is shaken while recording,
the camera shake in the image can be corrected.
≥If the Movie Camera shakes too much, the
images may not be stabilized.
1 Set [TAPE RECORDING MENU] >>
[CAMERA] >> [SIS] >> [ON].
≥The [[] Indication appears.
2 Press the Recording Start/Stop Button (45)
or [PHOTO SHOT] Button
(39) to start
recording.
To Cancel Image Stabilizer Function
Set [TAPE RECORDING MENU] >> [CAMERA]
>> [SIS] >> [OFF].
≥For other notes concerning this item, see
-50-.
20
t
W
T
D.ZOOM
VOL/JOG
WT
(40)
MENU
STILL
ENTER
FADE
is
(18)
PHOTO SHOT
(39)
(45)
55B-ENG.book 24 ページ ２００４年２月４日 水曜日 午前１１時５４分
To Next Page
Loading...
