Panasonic NV-RX11A - Stopping Recording

■ Stopping Recording
6 Press the Recording Start/Stop Button.
• Recording stops and the Movie Camera changes
over to the Recording Pause (standby) Mode.
7 Turn in the [POWER] Switch to turn the
Movie Camera off.
8 Take out the cassette.
9 Disconnect the AC Adaptor or remove
the Battery.
if you leave the Movie Camera in the Recording Pause
Mode for more than 6 minutes, it automatically switches
off to protect the tape and to conserve battery power. To
resume recording from this condition, turn in the
[POWER] Switch (the Movie Camera switches off) and
then turn it out again.