Panasonic NV-RX11A - Searching for a Tape Position before the End of the Last Recording (Camera Search Function)

Searching for a Tape Position
Before the End of the Last
Recording
(Camera Search Function)
This function makes it easy to search for a point in a
previously recorded scene or cassette from which you
want to start recording a new scene. In addition, it
ensures smooth scene-to-scene transitions free from
picture distortion.
1 Turn out the [POWER] Switch to turn the
Movie Camera on.
2 Insert a cassette.
•The Movie Camera changes over to the
Recording Pause Mode.
3 Look in the Finder and keep the
[-SEARCH] Button (or the [SEARCH+]
Button) pressed. When you have found
the point where you want to Join the
new recording, release the button.
4 Press the Recording Start/Stop Button
to start recording again.