Panasonic NV-RX11A - Checking the End of a Recorded Scene {Recording Check Function).25

Checking the End of a
Recorded Scene
(Recording Check Function)
By automatically playing back the final approximately 2
seconds of the last recorded scene, this function lets
you check if a just finished scene has been recorded
correctly. After that, the next scene is automatically
joined with a smooth transition free from picture
distortion. For especially important scenes, use this
function from time to time for confirmation.
1 Press the Recording Start/Stop Button
to stop recording.
•The Movie Camera changes over to the
Recording Pause Mode.
2 Look in the Finder and briefly press the
[-SEARCH] Button.
•The [CHK] Indication appears in the Finder and
the final approximately 2 seconds of the last
recorded scene are played back.
After that, the Movie Camera returns to the
Recording Pause Mode and is ready for
recording the next scene.
{[CHK] means Check.)
3 Press the Recording Start/Stop Button
to start recording again.
25