Panasonic NV-RX11A - Page 56

■ Recording and Playback Indications
©Recording Mode (large Indication) (-> 23)
©Recording Mode (small indication) (-* 23)
©Tape Movement during Recording (-> 23)
©Recording Pause Mode (large indication) (-» 23)
©Recording Pause Mode (small indication) (-* 23)
©Recording Check Mode (-* 25)
© Index Signal Recording Mode
An index signal is automatically recorded (and the [INDEX]
Indication flashes briefly in the Finder while it is being recorded)
when you:
•Turn the Movie Camera on and start recording.
•Start recording after inserting a cassette.
• Press the [VCR/CAMERA] Button to change from the VCR to
the Camera Mode or vice versa.
The recording of index signals makes it possible to use the VHS
Index Search or Intro Scan Function during playback on a VCR
equipped with these functions.
(Refer to the operating instructions of your VCR.)
© Playback Mode (-> 29) / Camera Search Mode
(-> 26)
©Fast Forward/Cue Mode (-> 32, 33)
©Rewind/Review Mode (- ► 32, 33)/
Camera Search Mode (-* 26)
©Still Playback Mode (-* 33)
© Elapsed Tape Time (-* 46)
When the tape is rewound further than the Elapsed Tape Time
Position [0:00.00], the minus sign [-] appears in front of the
Elapsed Tape Time Indication
©Elapsed Tape Time with activated Memory Stop
Function (-» 48)
® Remaining Tape Time (-* 17)
©Tape Length (- ► 16)
© Date and Time (-> 20)
©Title (small indication) (-> 45)
©Title (large indication) (-» 45)
© Recording Speed Mode (- ► 23)