Supplying Power
VCR DO OUT Connector
DC IN
Connector
Connect AC Adaptor VCR DC OUT
to Camcorder DC IN with supplied
DC Power Cabte_
Plug in AC Adaptor.
POWER Lamp lights.
Notes:
• AC AdaptorcannotpowerCamcorderwhile
charging Battery,
° When not in use, unplug AC Adaptor from AC
outlet. (Adaptor uses 1.2W of electricity while
plugged in:)
_cCAUTION: ............
s unit will operate on 110/120/220/240 V AC. An AC plug adaptor may be /
uired for voltages other than 120 V AC. Please contact either a local or foreign I
trical parts distributor for assistance in selecting an alternate AC plug. |
recommend using the accessory power plug adaptor (VJSS0070) in an area I
Lwhich has special AC outlets. J
. "o " , e e (Je • .
DC IN
Connector
\
1
2
Connect PV-C16 Car Battery Cord
(optional, page 76) to Camcorder
DC IN.
A Start engine first.
B Plug Car Battery Cord into
Cigarette lighter socket.
• It Car Battery cord fuse needs
replacing, use exact current rating
(in amps).
Cigarette Lighter
Socket (12 V)
Car Battery Cord Cigarette
(optional) Lighter Plug
14
Notes:
• This cord only works in vehicles equipped
with DC 12 V (negative ground) battery,
Check with your car/truck dealer. Use
only specified car battery cord.
• To avoid blowing the car battery cord
fuse, do step 2 in the proper order.
. Running vehicles must be well ventilated.
• When not in use, disconnect cigarette
lighter plug.
ii[,] = t--_.l_--Im'i[,.z_,._.u i It:[m,[0._',lii n 1/;11 f;'frf_
To Next Page
Loading...
