Camera Recording
* " "" , • , _ Before you begin...
5
VISION
ADJUSTMENT
ConnectCamcorderto power source.
* Insert cassette with recordtab (page15),
Set POWER to CAMERA.
Lens Cover opens.
Power lamp lights. EVFor LCD
monitor
• Be sure POWER
CAMERA
position.
Record/Pause mode.
Look into EVF and adjust VISION
ADJUSTMENT to your eyesight.
Slide TAPE SPEED to SP or SLP
(page 15)i
Press RECORD/PAUSE to start or
pause recbrding.
Tally lamp lights if set to ON (page
37),
I RECORD
3
Built-in Twin Capsule
2-Way Microphone
System
Set POWER to OFF when finished.
• TO remove cassette,
slide TAPE EJECT in Record/
Pause mode. (page 15).
Tally Lamp
Note:
• When Camcorder isaimed at excessively
bright objects, or bright lights, a vertical bar
may appear in the picture. This is normal for
the CCD pick-up. Try to avoid this when
possible,
23
To Next Page
Loading...
