Digital E.LS.
Before you begin...
• Connect Camcorderto powersource.
• Set POWERto CAMERA,
HeFps slabilize picture when recording in
unstable situations.
!
\
2,3
l _Digital EIS ON_
Slide DIGITAL SELECT to EIS.
3
Press EIS to display "EIS" in the EVF
or LCD monitor.
• Image becomes slightly enlarged
and shutter speed auto-adjusts from
1/80 to 1/350 according to
brightness.
• Use High Speed Shutter (page 36)
if needed. Shutter speed setting
remains after EIS is canceled.
Press EIS again to cancel when not
{n use.
E.I.S. may not function during.,.
• extreme Camcorder movement.
• recording of subject with distinct
horizontal or vertical stripes.
• low light situations (EIS indicator
flashes).
• intense fluorescent lighting situations.
• recording of very fast motion.
Note:
• If "NOW IN DiGiTAL WIPE" is displayed
when EIS is pressed, DIGITAL SELECT
is currently in DIGITAL WIPE mode and
the Digital EJ.S. feature is not available.
43
To Next Page
Loading...
