Digital Still Camera
Insert a Captured still image into the current recording, or vice versa, in one of three
wipe effects. Before you begin...
2
[] 3
MODE
WIPE 1 -'_ WIPE 2 "_ WIPE 3 "
(first press)
WIPE t' V_qPE2 _' WIPE 3 _"
(Captured image)
] _ (C_tur_d image)
WIPE 1 •WIPE 2 _' WIPE 3 •
._j
{Current Rec_a_g)
• Connect Camcorder to power source.
• Insert the CompactFlash Card (page 49).
• Set POWER to CAMERA.
Repeat step 1 and 2 on page 57 to
set Picture in Picture Wipe title.
Press MODE repeatedly for Wipe
effect 1, 2, or 3 (See left).
• WiPE 1 will flash for a while to store
the image for the wipe.
Press START:
once ---,inserts captured image.
twice ---,inserts current recording
picture.
• You can freeze the wipe in progress
by pressing START. Press START
again to resume wipe.
Note:
• If CompactFlash Card is not inserted,
"NO CF CARD" appears on-screen. Set
Power to OFF, then insert the
CompactFlash Card.
• Pictures captured with other brand
products cannot be used with this
Camcorder.
• If "INCOMPATIBLE IMAGE" appears
on-screen, the size of the captured
image cannot be played back on this
Camcorder.
• If "CF CARD ERROR" appears
on-screen, see page 80.
. If Digital Wipe mode is selected, the
following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Filter, Digital Zoom, Digitat E.I.S.,
Still/Strobe/Wide.
58
To Next Page
Loading...
