Digital Still Camera
IIIIIIIIII I
Before you begin...
• Connect Camcorderto powersource.
• Insert the CompactFlashCard (page 49).
• Set POWERto PHOTO,
2
Note:
• If CompactFlash Card is not inserted,
"NO CF CARD" appears on-screen. Set
Power to OFF, then insert the
CompactFlash Card.
• Pictures captured with other brand
products cannot be used with this
Camcorder.
• If "INCOMPATIBLE IMAGE" appears
on-screen, the size of the captured
image cannot be played back on this
Camcorder.
° Do not change POWER setting to
CAMERA or change recording mode
while "PLEASE WAIT" is displayed.
,,If "CF CARD ERROR" appears
on-screen, see page 80.
4
Press LCD-OPEN and swing LCD
monitor fully open. Adjust viewing
angle.
Slide PHOTO MODE to PLAY,
The Multi Image Playback screen
appears. The last captured image
• If there are no recordings on the
card, "NO PICTURE" appears
on-screen.
• In NORMAL or FINE mode, the
color of the Mulli Image page
number is as follows:
NORMAL mode --, green
FiNE mode --,white
Press_ -* next,
Press _ -* previous.
• The selected image will be
underlined in green.
• Continue pressing + (FF) or
- (REW) for next or previous page.
Press PLAY to display image. This
screen appears followed by image.
PLEASE WAIT
,_3JEC"t" : PUSH 4. KEY
• Press DISPLAY to remove or
redisplay this screen.
• Press STOP to redisplay Multi
Image playback screen.
53
To Next Page
Loading...
