High Speed Shutter
Improves Still or Slow Motion playback Before you begin,,,
picture of high speed subjects (e.g+ a tennis , ConnectCamcorderto power source,
stroke), when viewed on Camcorder or 3. • Set POWERto CAMERA,
or 4 head VCR+ • Insert cassette withrecordtab (page 15),
In AUTO mode (no indication in EVF or LCD monitor), shutter speed is auto-adjusted
from 1/60 to 1/350 according to subject brightness.
• AUTO mode is selected each time POWER is set to CAMERA.
_iLAP.lil I P..111-._'1"_F-r'_J[.] il
The faster the shutter speed, the more light is needed for proper picture and color quality.
High Speed Shutter indication flashes if light is inadequate. Provide additional light.
SHUTTER
EVF or LCD monitor
!
No Indication
+
1/60
+
1/100
+
11250
+
11500
+
1/100o
+
1/2000
+
1/4000
+
1/10000
I
1
2
Press HIGH SPEED SHUTTER
while recording.
Press repeatedly to change shutter
speed. (See below, left.)
Note:
• Provide additional ha!ogen or tungsten
light for use indoors or in poor light.
Fluorescent light degrades picture.
• Auto Focus may not function properly if
high speed shutter is used in inadequate
light.
• Setting reverts to AUTO each time
POWER is set to CAMERA.
36 II _[.1tl_.I.:.'..-'JI.'t_1=[_,_le;- dII H:[lII3,'.liliD _,/;1_r_|V_4 |
To Next Page
Loading...
