Replacing Clock/Remote Battery
The clock and remote batteries are pre-instalted. Follow the steps below if replacement
becomes necessary.
WARNING: .............................
IReplace battery with Panasonic PART NO, VSBWO004 (CR2025) only. Use of another
Ibattery may present a risk of fire or explosion.
ICaution: Battery may explode if mistreated. Dispose of used battery promptly. Keep
Laway from children. Do not recharge, disassemble or dispose of in fire.
Tripod Mounting Hole
1
1 s
2
Underside View
4
@
©
While pinching 2 tabs, pull Battery
Tray out.
Bend 1 tab to remove Battery.
4
Snap new Battery (_) mark down)
into Battery Tray.
• Do not reverse the polarity.
Insert Battery Tray so the triangle
marks meet.
Note:
• Keep Battery out of children's reach.
Swallowing it may be harmful,
• Improperly installed, discharged, or
missing battery causes "CLOCK
BATTERY" to appear when DISPLAY is
pressed.
• Battery life is approximately 5 years.
_ While pressing stopper tab,
(_) pull Battery Tray out.
Insert battery into tray with
(_ mark down.
Do.,,.rlotreverse Dolar_tJL.
74
3 Replace Battery Tray.
To Next Page
Loading...
