Before Requesting Service
III I _: _-_ ,_,_ I I ........... =J_ .......... ZjLZ'I'!L __
If a problem arises, you may be able to correct it yourself.
See Symptom and Correction list below.
Symptom
No picture in EVF or LCD monitor ,_
The right side of the screen appears grayish...
Video cassette cannot be inserted ...
Video cassette cannot be removed ._
Operation buttons do not work .,.
Recording cannot be done ,..
Auto Focus does not operate ...
Sound from microphone can't be monitored ..
Camera picture is tOodark _.
No playback picture, or the playback
picture is noisy or contains streaks ...
"Panasonic ITS TAPES PLAY IN YOUR VCR ...
appears in EVF or LCD Monitor ...
"NO CF CARD" appears in EVF or LCD
Monitor...
Cannot capture the image ,_
Cannot playback Still image ...
"NO PICTURE" appears in EVF OrLCD
Monitor ,..
Top of playback picture waves back and forth
excessively...
Correction
• Connect PowerSource. (pp. 12, 14)
,• Set POWER to VCR orCAMERA. {pp. 23, 29)
I_ heck tor Dew indication.(p. 70)
Use fully charged Battery.(p. 12)
Firmlyconnectall needed cables. (p. 3,!,,!......
• Be sure to slide DigitalSelect to Dgital Wipe, (p. 58)
° Connect Power Source. (pp, 12, 14)
• Insert cassette,window side facing out. (p. 15)
• Connect Power Source. (pp_12, 14)
• Check for Dew Indication. (p. 70i
• Make sure record tab is intact. (p, 15)
• Check Battery Indicator. (p. 68)
• Check for Dew Indication. (p. 70)
• Set FOCUS to AUTO. (p. 35)
• Set POWER to CAMERA, (p. 23)
° Set unit to REC or Record/Pause mode.
• Turn HIGH SPEED SHUTTER off, (p. 36)
• Press UP AbJDOWN• button during playback(Trackin!
Control). (p.30)
• Set POWER to CAMERA, then set SELF DEMO : OFF
in MENU screen to cancel Demo mode. (p. 8)
° Make sure CompactFlash Card is inserted. (p. 49)
° Set POWER to PHOTO. (p. 50)
• No memory remaining.Delete some images before
capturing more,!,mages.
• Set POWER to PHOTO. (p. 53)
• Make sure CompactFlash Card is inserted. (p. 49)
• There are no images in memory.
, A playback signal is not as stable as an off the air TV
signal, so the top of your TV screen may appear bent or
unstable during playback. This is caUed, =Horizontal
AFC time constant change." To correct, slowly turn the
TV horizontal hold control. If you TV does not have this
control, or adjusting itdoes not help, contact your TV
service center. (Some nominal service charges may be
required.)
79
To Next Page
Loading...
