AttachingShoulderStrap/RemoteHolder
Remove Battery Pack before doing steps.
1
2
Undo strap ends from buckles.
Remove one buckle.
_Thread strap (with no buckle)
through Remote Holder so it
faces outward.
_ Replace buckle,
Thread strap ends through Strap
Rings on Camcorder,
Re-insert the strap ends into
buckles.
1
2
•Insert Remote into Holder when not
in use.
Pull a loop of strap from buckle.
Pull strap tight to shorten or
lengthen.
Adjust Hand Strap length to fit your
hand as shown.
To Next Page
Loading...
